Well... the short answer would be "Cellular Connection!" This keypad works just like your traditional keypad, the only difference being it's cellular and connected to the cloud. So the same way that your cell phone is connected to the cloud, the keypad is connected to the cloud. Modern day technology has enabled an increase in efficiency and performance. This simple looking keypad is the answer you've been looking for! There are no other boxes, software or controllers to install. There are no wires to be ran back to your main office. You simply have a relay wire ran over to your gate motor and a wire for electricity. Note, Cellular keypad does not have a camera built in.

       It works just like our cellular version only it plugs in using a CAT5 cable. There are no other boxes, software or controllers to install. You simply have a relay wire ran over to your gate motor and a piece of CAT5 that is connected to your local internet connection. That's it! After you're hooked up. You'll have full control.

       This keypad is identical to the standard S22i only this pad, the S23i, has a camera. It snaps a photo on every individual that presses the ENTER button on this keypad. It then stores that photo in activity log for your viewing, along with the regular activity by your customers.

      It can literally be used anywhere! It works just like a normal keypad works but it's small and compact enough to be mounted on an individual storage unit or for the man doors leading to the inside of a climate controlled building. If it is used for individual units, only the code of the tenant occupying that specified unit will work for that pad. These pads are perfect for RV units that have an automatic garage door opener, on the door. These doors are normally too heavy to lift manually. This pad does the job plus a tenant can open their unit with the tenant app as well, if the location has the Spiderdoor Personalized tenant app.

       This is another one of Spiderdoors newest creations along with our ByFlow Access Control System (shown above.) These individual door latches are state of the art technology created by SpiderDoor. There are several ways the latches can function, but the primary use is to over lock tenants’ units automatically and avoid that dreadful practice of manually walking to every single delinquent unit and over lock it. Our latches can be purchased and installed, one at a time or install as many as you'd like to install. They are easy to install, and we currently have latches for a few of the major roll up doors. Again, these can be added to most existing roll up doors. The install is simple and requires the installer to drill 6 holes and bolt the unit to the door. Our latches mount inside the unit on the lower corner of the door, detouring disgruntle tenants from prying a latch or over locking mechanism off the unit’s door from the outside. Tenants will still use their personal lock on the outside of the door, giving them peace of mind that no one has access to their unit.

       Simply take one of our wireless units and stick it to the ceiling of a tenants unit. We do the rest. We provide activity logs, allow alarms to be deactivated with our entrance keypads or the tenants personal mobile app. Managers will instantly get text notifications anytime a unit has been triggered and not properly deactivated by the tenant. This system is insane! Call today

       This module mounts direct to your gate motor and allows the manager to open the gate at any time from their desktop dashboard or the SpiderDoor managers app. It doesn't matter the brand or type of keypad you currently have! It bypasses all access control programs and keypads and allows you immediate access. If your tenants use our personalized SpiderDoor app, it will allow the tenants to open the gate as well. Two wires go direct to your relay inside the gate motor. SpiderDoor does the rest with ease.

click photo to enlarge

click photo to enlarge